Scrap brass Brisbane
Scrap brass Brisbane: prepare fittings and mixed brass
Drain taps, valves and fittings, separate obvious attachments and show the whole parcel so brass-bearing material can be assessed clearly.
Illustrative industry image
Material overview01
Start with the brass form
Brass appears in plumbing fittings, valves, taps, hardware, radiators and machined offcuts. The base alloy, cleanliness and attached steel, plastic, rubber, water or other material determine whether a parcel can be treated as clean brass or a mixed item.
Common enquiry examples
- Taps and plumbing fittings
- Valves and meters
- Machined brass offcuts
- Marine hardware
- Brass sheet and tube
- Mixed brass-bearing items
Acceptance is load-specific
Grade guide02
How brass is described
Use the closest description you can support, then show the material clearly. Final identification is based on the actual parcel.
- Clean brass solids
- Brass sheet, tube, bar, offcuts and hardware without substantial steel, plastic, rubber or other attachments. Show plating or coatings where present.
- Taps, valves and fittings
- Drain water and identify handles, cartridges, hoses, steel spindles and other attached parts. These items may be assessed as mixed brass rather than clean solids.
- Bronze and gunmetal
- Bearing, marine and valve alloys can require separate identification. Send markings, application details and close photographs instead of assuming every yellow or red alloy is brass.
- Mixed brass-bearing items
- Meters, radiators, assemblies and plated items are assessed from the complete construction and recoverable content, not from one visible brass surface.
Quote basis03
What can change the assessment
A material name is only the start. Composition, preparation, quantity and handling details make the quote useful.
- Alloy and item type
- Brass, bronze, gunmetal and plated or mixed items can require different identification and handling.
- Attachments
- Steel spindles, plastic handles, rubber, hoses, cartridges and meters reduce the proportion of recoverable brass.
- Moisture and residue
- Drain fittings and describe any oil, scale or process residue before the material is moved.
- Separation and weight
- Keep clean solids apart from mixed fittings and give a realistic estimate of the parcel size or weight.
MetalBase does not publish a generic rate on this guide. Request a current assessment for the actual material and confirm the terms before handover.
Read the pricing guideBefore you enquire04
Prepare four useful details
Clear photos and realistic measurements reduce avoidable back-and-forth.
- 01
Drain fittings
Remove water and identify oil or process residue before transport or collection. - 02
Separate clean solids
Keep clean offcuts, bar, sheet and tube apart from taps, valves and mixed assemblies. - 03
Show attached material
Photograph handles, cartridges, steel spindles, hoses and other parts that remain. - 04
Include identifying marks
Send stamps, labels and application details when bronze, gunmetal or another alloy may be present.
No public customer yard
Do taps and valves need to be dismantled before a quote?
Not necessarily. Drain them and show the attached handles, cartridges, hoses, steel and plastic. Ask whether further separation is worthwhile before spending time on it.
How can I tell brass from bronze?
Colour alone is not reliable. Markings, the original application and analysis may be needed when the alloy affects the grade. Send clear photos and avoid guessing.
Can plated brass be included?
Include it in the enquiry and show the plating and complete item. The assessment depends on the base material and other attachments.
Can MetalBase collect bulk brass fittings in Brisbane?
Customer-site collection is available, with minimum volume, access, equipment, timing and terms confirmed for the actual parcel and address.